Your Ip :http://192.168.0.1/
Set ups
You May Want to Fix something
NAT SETTINGS | |
Setting | Value |
NAT Mapping Enable | yes |
NAT Keep Alive Enable | yes |
PROXY AND REGISTRATION | |
Setting | Value |
Proxy | Enter callcentric.com in this field |
Outbound Proxy | Enter callcentric.com in this field |
Use Outbound Proxy | yes |
Use DNS SRV | yes |
DNS SRV Auto Prefix | yes |
SUBSCRIBER INFORMATION | |
Setting | Value |
User ID | Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) |
Password | Enter your SIP Password here. Your SIP password is the same password you create when you sign up for you Callcentric account. Optionally you may change it in your preferences. |
Auth ID | Enter your Callcentric number here (your Callcentric number starts with 1777 and has an additional 7 digits) |
Use Auth ID | yes |
AUDIO CONFIGURATION | |
Setting | Value |
Preferred Codec | G729a |
DTMF Tx Method | Auto |
STEP 1 | Connect your router with the supplied Ethernet network cable to the PAP2. Now connect your phone to the PAP2 Line 1 port. Finally plug the supplied power cable into the PAP2. |
STEP 2 | Wait 60 seconds after plugging your PAP2 in. |
STEP 3 | Pickup the phone connected to the PAP2 and dial the * key on your phone 4 times. |
STEP 4 | Have a pen and paper ready. You will hear a message - "Configuration menu. Please enter option followed by the pound key...", then enter1 1 0 # on your phone. You will now hear a message giving you the IP address of your PAP2 such as - "192.168.1.100 write this number down. |
STEP 5 | Open a web browser on your computer such as Internet Explorer and enter the IP address you heard in step 4 as the address (I.E. where you would normally enter www.yahoo.com). Please note: some browsers will require you to remove leading zero's ( 0 's ) in the IP address. For example if you heard "192.168.001.010" you should change this to "192.168.1.10". |
STEP 6 | Please note, the PAP2 by default does not have a password assigned to it, so you should now see a page that looks like this: If you are prompted to enter the username and password please enter it and you should see the image above. |
STEP 7 | Now click on the "(switch to advanced view)" link as indicated in the picture below: |
STEP 8 | Now click on the "Admin Login" link as indicated in the picture below: |
STEP 9 | Click the tab labeled "System" in the menu at the top: |
STEP 10 | Enter time servers and DNS servers as indicated below:
Click the "Save Settings" button after you have entered the time servers. The web page will display a screen for a few seconds stating that it is saving the changes you made. Router:Dlink-dir 655 Modem:ADSL2T Voip:PAPT2 Ip:192.***.***.*** Phone Number:289-470-6*** |